BESS is a save state format specification designed to allow different emulators, as well as majorly different versions of the same emulator, to import save states from other BESS-compliant save states. BESS works by appending additional, implementation-agnostic information about the emulation state. This allows a single save state file to be read as both a fully-featured, implementation specific save state which includes detailed timing information; and as a portable "best effort" save state that represents a state accurately enough to be restored in casual use-cases.
## Specification
**Note: This specification is currently under development and will potentially change in the near future**
Every integer used in the BESS specification is stored in Little Endian encoding.
### BESS footer
BESS works by appending a detectable footer at the end of an existing save state format. The footer uses the following format:
Every block is followed by another blocked, until the END block is reached. If an implementation encounters an unsupported block, it should be completely ignored (Should not have any effect and should not trigger a failure).
The NAME block uses the `'NAME'` identifier, and is an optional block that contains the name of the emulator that created this save state. While optional, it is highly recommended to be included in every implementation – it allows the user to know which emulator and version is compatible with the native save state format contained in this file. When used, this block should come first.
The length of the NAME block is variable, and it only contains the name and version of the originating emulator in ASCII.
The INFO block uses the `'INFO'` identifier, and is an optional block that contains information about the ROM this save state originates from. When used, this block should come before `CORE` but after `NAME`. This block is 0x12 bytes long, and it follows this structure:
The CORE block uses the `'CORE'` identifier, and is a required block that contains both core state information, as well as basic information about the BESS version used. This block must be the first block, unless the `NAME` or `INFO` blocks exist then it must come directly after them. An implementation should not enforce block order on blocks unknown to it for future compatibility.
The length of the CORE block is 0xD0 bytes, but implementations are expected to ignore any excess bytes. Following the BESS block header, the structure is as follows:
BESS uses a four-character string to identify Game Boy models:
* The first letter represents mutually-incompatible families of models and is required. The allowed values are `'G'` for the original Game Boy family, `'S'` for the Super Game Boy family, and `'C'` for the Game Boy Color and Advance family.
* The second letter represents a specific model within the family, and is optional (If an implementation does not distinguish between specific models in a family, a space character may be used). The allowed values for family G are `'D'` for DMG and `'M'` for MGB; the allowed values for family S are `'N'` for NTSC, `'P'` for PAL, and `'2'` for SGB2; and the allowed values for family C are `'C'` for CGB, and `'A'` for the various GBA line models.
* The third letter represents a specific CPU revision within a model, and is optional (If an implementation does not distinguish between revisions, a space character may be used). The allowed values for model GD (DMG) are `'0'` and `'A'`, through `'C'`; the allowed values for model CC (CGB) are `'0'` and `'A'`, through `'E'`; the allowed values for model CA (AGB, AGS, GBP) are `'0'`, `'A'` and `'B'`; and for every other model this value must be a space character.
* The last character is used for padding and must be a space character.
For example; `'GD '` represents a DMG of an unspecified revision, `'S '` represents some model of the SGB family, and `'CCE '` represent a CGB using CPU revision E.
* Sprite priority is derived from KEY0 (FF4C) instead of OPRI (FF6C) because OPRI can be modified after booting, but only the value of OPRI during boot ROM execution takes effect
The contents of large buffers are stored outside of BESS structure so data from an implementation's native save state format can be reused. The offsets are absolute offsets from the save state file's start. Background and object palette sizes must be 0 for models prior to Game Boy Color.
An implementation needs handle size mismatches gracefully. For example, if too large MBC RAM size is specified, the superfluous data should be ignored. On the other hand, if a too small VRAM size is specified (For example, if it's a save state from an emulator emulating a CGB in DMG mode, and it didn't save the second CGB VRAM bank), the implementation is expected to set that extra bank to all zeros.
The XOAM block uses the `'XOAM'` identifier, and is an optional block that contains the data of extra OAM (addresses `0xFEA0-0xFEFF`). This block length must be `0x60`. Implementations that do not emulate this extra range are free to ignore the excess bytes, and to not create this block.
The MBC block uses the `'MBC '` identifier, and is an optional block that is only used when saving states of ROMs that use an MBC. The length of this block is variable and must be divisible by 3.
This block contains an MBC-specific number of 3-byte-long pairs that represent the values of each MBC register. For example, for MBC5 the contents would look like:
An implementation should parse this block as a series of writes to be made. Values outside the `0x0000-0x7FFF` and `0xA000-0xBFFF` ranges are not allowed. Implementations must perform the writes in order (i.e. not reverse, sorted, or any other transformation on their order)
The RTC block uses the `'RTC '` identifier, and is an optional block that is used while emulating an MBC3 with an RTC. The contents of this block are identical to 64-bit RTC saves from VBA, which are also used by SameBoy and different emulators such as BGB.
The HUC3 block uses the `'HUC3'` identifier, and is an optional block that is used while emulating an HuC3 cartridge to store RTC and alarm information. The contents of this block are identical to HuC3 RTC saves from SameBoy.
The length of this block is 0x11 bytes long and it follows the following structure:
The SGB block uses the `'SGB '` identifier, and is an optional block that is only used while emulating an SGB or SGB2 *and* SGB commands enabled. Implementations must not save this block on other models or when SGB commands are disabled, and should assume SGB commands are disabled if this block is missing.
The length of this block is 0x39 bytes, but implementations should allow and ignore excess data in this block for extensions. The block follows the following structure:
If only some of the size-offset pairs are available (for example, partial HLE SGB implementation), missing fields are allowed to have 0 as their size, and implementations are expected to fall back to a sane default.
The END block uses the `'END '` identifier, and is a required block that marks the end of BESS data. Naturally, it must be the last block. The length of the END block must be 0.
## Validation and Failures
Other than previously specified required fail conditions, an implementation is free to decide what format errors should abort the loading of a save file. Structural errors (e.g. a block with an invalid length, a file offset that is outside the file's range, or a missing END block) should be considered as irrecoverable errors. Other errors that are considered fatal by SameBoy's implementation:
* Duplicate CORE block
* A known block, other than NAME, appearing before CORE
* An invalid length for the XOAM, RTC, SGB or HUC3 blocks
* An invalid length of MBC (not a multiple of 3)
* A write outside the $0000-$7FFF and $A000-$BFFF ranges in the MBC block
* An SGB block on a save state targeting another model
